memoria: h27u1g8f2btr

bootsh 25-201804051805
se enchufa y se mantiene apretado reset hasta que llegue a .. FALSE (dos seguidos, como dos estados de arranque). Ahí se suelta reset (sino no sigue) y llega a un shell en el que no se puede escribir, ahi reiniciamos el putty y ya podemos escribir.
no hay odm, ni wget. Tiene un servidor http y un servidor de telnet. tambien tiene un cliente de telnet y un tftp. no tiene la particion mtpblock2, y tanto la 0 como la 1 se reconocen pero no se montan. ademas, da errores de crc al intentar leer la particion mtpblock0 (meraki)
no tiene /storage
puede coger ip y comunicarse por ping y tftp.

(aj)
uname -a 
Linux (none) 2.6.31--LSDK-9.5.3.15-ga2a05dd-dirty #6 Mon Nov 4 21:01:20 PST 2013 mips unknown
boot 59 build 25-201804051805-G885d6d78-dhow-rel board ar7100 mac 00:18:0A:7A:CF:24

(j)
uname -a
Linux (none) 2.6.31--LSDK-9.5.3.15-ga2a05dd-dirty #6 Mon Nov 4 21:01:20 PST 2013 mips unknown
 boot 70 build 25-201804051805-G885d6d78-dhow-rel board ar7100 mac 00:18:0A:7A:DB:54

  mr18-sysupgrade.tar.gz
  sr/ squashfs system root


tftp -gr fichero 192.168.1.101
  mtd
  librerias:
  ld-musl-mips-sf.so.1
  libubox.so
  openwrt-ar71xx-nand-mr18-initramfs-kernel.bin

  
  /sbin # ./mtdinfo /dev/mtd0
  mtd0
  Name:                           meraki
  Type:                           nand
  Eraseblock size:                131072 bytes, 128.0 KiB
  Amount of eraseblocks:          1023 (134086656 bytes, 127.8 MiB)
  Minimum input/output unit size: 2048 bytes
  Sub-page size:                  unknown
  OOB size:                       64 bytes
  Bad blocks are allowed:         true
  Device is writable:             true

  /sbin # mtddebug info /dev/mtd0
  mtd.type = MTD_NANDFLASH
  mtd.flags = MTD_CAP_NANDFLASH
  mtd.size = 134086656 (127M)
  mtd.erasesize = 131072 (128K)
  mtd.writesize = 2048 (2K)
  mtd.oobsize = 64
  regions = 0

/sbin # mtddebug read /dev/mtd0 0 0x2000 /tmp/dosmil
ath_nand_rw_page: Read uncorrectable errors. 0x0 0 ecc = 0x426
flash_to_file: short read, requested 0x2000, read 0x1
Couldn't copy entire buffer to /tmp/dosmil. (1/8192 bytes copied)
/sbin # mtddebug read /dev/mtd0 0x880000 0x2000 /tmp/dosmil
ath_nand_rw_page: Read uncorrectable errors. 0x11000000 0 ecc = 0x426
flash_to_file: short read, requested 0x2000, read 0x1
Couldn't copy entire buffer to /tmp/dosmil. (1/8192 bytes copied)


/sbin # cat /proc/mtd
dev:    size   erasesize  name
mtd0: 07fe0000 00020000 "meraki"
mtd1: 00020000 00020000 "caldata"
/sbin # mtdpart add /dev/mtd0 nandloader 0 0x80000
mtdpart: error!: Failed to issue BLKPG ioctl
         error 25 (Not a tty)

/proc # cat cmdline
console=ttyS0,115200 rdinit=/sbin/init mtdparts=ath-nand:130944k(meraki),128k(caldata) mem=128M

[    0.460000] Creating 5 MTD partitions on "ath79-nand":
[    0.468000] 0x000000000000-0x000000080000 : "nandloader"
[    0.472000] 0x000000080000-0x000000880000 : "part1"
[    0.480000] 0x000000880000-0x000001080000 : "part2"
[    0.484000] 0x000001080000-0x000007f80000 : "ubi"
[    0.492000] 0x000007fe0000-0x000008000000 : "odm-caldata"
[    0.500000] Mapping 116568 bytes for /lib/modules/ubi.ko
[    0.508000] UBI: attaching mtd3 to ubi0
[    0.512000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    0.520000] UBI: logical eraseblock size:    129024 bytes
[    0.524000] UBI: smallest flash I/O unit:    2048
[    0.528000] UBI: sub-page size:              512
[    0.532000] UBI: VID header offset:          512 (aligned 512)
[    0.540000] UBI: data offset:                2048
[    0.684000] UBI: max. sequence number:       1108290
[    0.696000] UBI: attached mtd3 to ubi0
[    0.700000] UBI: MTD device name:            "ubi"
[    0.708000] UBI: MTD device size:            111 MiB
[    0.712000] UBI: number of good PEBs:        888
[    0.716000] UBI: number of bad PEBs:         0
[    0.720000] UBI: number of corrupted PEBs:   0
[    0.724000] UBI: max. allowed volumes:       128
[    0.732000] UBI: wear-leveling threshold:    4096
[    0.736000] UBI: number of internal volumes: 1
[    0.740000] UBI: number of user volumes:     7
[    0.744000] UBI: available PEBs:             480
[    0.748000] UBI: total number of reserved PEBs: 408
[    0.752000] UBI: number of PEBs reserved for bad PEB handling: 8
[    0.760000] UBI: max/mean erase counter: 1534/1248
[    0.764000] UBI: image sequence number:  0
[    0.768000] UBI: background thread "ubi_bgt0d" started, PID 223
[    0.776000] Mapping 9148 bytes for /lib/modules/gluebi.ko
[    0.792000] Mapping 235308 bytes for /lib/modules/ubifs.ko


https://n207.meraki.com/o/2fJEPb/manage/organization/firmware_upgrades/overview#