Recovery Web Interface
From dd-wrt Linksys WRT610N documentation
1. unplug all ethernet ports (Important!)
2. unplug power
3. plug power in
4. wait 2-2.5 seconds
5. press the reset button and keep it pressed for 5 seconds, then release it
6. reconnect ethernet (DHCP shoud give IP address to computer)
7. point your browser at http://192.168.1.1.
8. You should see a “Management Firmware update” screen. Give it the openwrt-wrt610n_v1-squashfs.bin or openwrt-wrt610n_v2-squashfs.bin file depending on hardware version.
If you have a serial console and the above isn't working you can press ctrl-c while the router is booting to get to a CFE prompt, then either:
1. nvram set safe_mode_upgrade=on
2. nvram commit
3. reboot
Me ha funcionado esto para flashear desde la consola cuando desde el terminal de emergencia no me flasheaba:
(configurando la red a mano para tener internet, y el hosts para resolver ftp.dd-wrt.com) wget ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010 /12-24-10-r15962/broadcom_K26/dd-wrt.v24-15962_NEWD-2_K2.6_mini_wrt610nv2.bin
y después:
sysupgrade dd-wrt.v24-15962_NEWD-2_K2.6_mini_wrt610nv2.bin
y se reinicia con éxito … :)